- home
-
our products
-
Special-purpose devices for furnitures
Cutters and cutter heads with bore
Replacement tip router cutters and boring bits
Cylindrical Cuttes With Threathed Shank
Firewood splitters and circular saws for firewood
Combined Woodworking multifunctions Machine
Moulding, Routing and edge banding
Equipment for shops and factory
Material handling and forklift
Universal table for miter saws and machines
-
- news
- contacts
Home > Woodworking Machines > Thickness and planers > Professional Planer Thicknesser JPT 310HH / JPT 410HH (138)
Professional Planer Thicknesser JPT 310HH / JPT 410HH
Plane helical carbide inserts 4-sided reversible
The planes combined JPT 310, 410 HH are innovative for the tree consisting of carbide inserts arranged spirally on four principles.
The cut is smooth and quiet because the work is divided among many asportazioe sharp.
A good knife steel tell an average of 100 hours of work, a carbide knife works for about 2000 hours. Do not change over a set of knives but you can turn the knife is worn out or just what if you were injured by a nail or impurity of the wood.
The ground wire in a single block, allows you to work with extreme precision pass to thickness without removing guides and guards, and not lose any settings previously made.
The planes combined JPT 310, 410 HH are innovative for the tree consisting of carbide inserts arranged spirally on four principles.
The cut is smooth and quiet because the work is divided among many asportazioe sharp.
A good knife steel tell an average of 100 hours of work, a carbide knife works for about 2000 hours. Do not change over a set of knives but you can turn the knife is worn out or just what if you were injured by a nail or impurity of the wood.
The ground wire in a single block, allows you to work with extreme precision pass to thickness without removing guides and guards, and not lose any settings previously made.
The plan of the planer gets up in a single block in the function passed in thickness.
This is very important because it offers several advantages:
- Never lose the alignment of the planer as it happens with other machines whose plane is separated into several sections
- Time it takes about 15 seconds
- The protection and also provides for the shavings conveyor is reversed and also serves for the planer
- To return to work flush takes about 15 seconds
- You will not removed nor put any protection on the ground, you will not have lost any control planer
-
Helical cutter head with 4-sided carbide inserts
-
Sliced cut – guarantees optimum surface quality
-
Extremely quiet
-
No chiping or tearout when working against the grain
-
Fine grain carbide, strong and wear resistant (5 times HSS)
-
Planed cast iron table guarantees optimum workpiece gliding
Technical data
Code art 400V | 10000292 T | 10000296 T |
Jointer table dimensions | 1400 mm | 1660 mm |
Max. planing width | 307 mm | 407 mm |
Thicknessing table size | 540 mm | 600 mm |
Planing thickness | 3 - 225 mm | 3 - 225 mm |
Max. chip removal (Jointer) | 3 mm | 3 mm |
Max. chip removal (Thicknesser) | 4,5 mm | 4,5 mm |
Number of knives | 56 | 72 |
Cutter block speed | 5500 rpm | 5500 rpm |
Feed speed | 5 m/min | 5 m/min |
Power output 400 V S1 | 32200 W | 2950 W |
Power input 400 V S6 | 3500 W | 4450 W |
Weight | 230 Kg | 330 Kg |
Item code
J10000292T, J10000296T